Conferences

LAST 5 YEARS (2008-2012)

Ash A., Oshkai P. and Djilali N., "Quantitative Imaging of Multi−component Turbulent Jets", Proceedings of 4th International Conference on HydrogenSafety (ICHS 2011), San Francisco, CA, 12−14 Sep. 2011.

Beatty, S, Buckham, B., "Sensitivity of point absorbing WECs to physical parameters of the reacting body," Proceedings of the 9th European Wave and Tidal Conference, Southampton, September 4-9, 2011.

Tietje.E.D, Folley, M, Beatty, S, Raftery, M., Ricci, P."Standardized Performance Assessment of Wave Energy Converters," Proceedings of the 9th European Wave and Tidal Conference, Southampton, September 4-9, 2011.

Barannyk, O., Buckham, B. and Oshkai P., “Experimental Investigation of the Fluid-Structure Interaction Aspect of an Oscillating Plate with Chordwise Flexibility”1st Symposium on Flutter Control and Application, Tokyo, Japan, September. 15-16th 2011.

Akhgari, A., Barannyk, O., and Oshkai P., “Experimental investigation of the performance of a cross-flow wind turbine with and without diffuser”, ICWE13 – 13th International Conference on Wind Engineering, Amsterdam, The Netherlands, July 10-15, 2011.

Williams, T., Crawford, C., “Probabilistic Power Flow Modeling: Renewable Energy and PEV Grid Interactions,” Proceedings of The Canadian Society for Mechanical Engineering Forum 2010, Victoria, BC, June 7-9, 2010. [.pdf]

Ash A., Oshkai P. and Djilali N., "Quantitative Imaging of Turbulent Jets in cross−flow", Proceedings of International Conference on Hydrogen andFuel Cell (HFC 2011), Vancouver, BC, 15−18 May 2011.

Lange, K., Sui, P.C., and Djilali, N. “Pore-Scale Simulation of Transport and Electrochemical Reactions in the Catalyst Layer of a PEM Fuel Cell.” 217th Meeting of the Electrochemical Society, Vancouver, BC, April 2010.

Lange, K., Sui, P.C., and Djilali, N. “Determination of Effective Transport Parameters from a Pore Scale Model of PEM Fuel Cell Catalyst Layers: Effects of Water Vapor and Temperature,” 2010 ASME Fuel Cell Conference, New York, NY, June 2010.

Velikorodny, A. and P. Oshkai. Acoustically-coupled Flows in Coaxial Side Branch Resonators with Bluff Rectangular Splitter Plates. in ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting. Montreal, Canada, August 1-5, 2010.

Barannyk, O., B. Buckham, and P. Oshkai. Effect of Chordwise Flexibility and Depth of Submergence on an Oscillating Plate Underwater Propulsion System. in ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting. Montreal, Canada, August 1-5, 2010.

Finnegan, S., C. Meskell, and P. Oshkai. Aeroacoustic Source Distribution Around Four Cylinders Orientated in a Square. in ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting. Montreal, Canada, August 1-5, 2010.

Finnegan, S., P. Oshkai, and C. Meskell. Experimental Methodology for Aeroacoustic Source Localisation in Ducted Flows with Complex Geometry. in 16th AIAA/CEAS Aeroacoustic Conference. Stockholm, Sweden, June 7-9, 2010.

Beatty, S., Nicoll, R., Buckham, B., Wild, P. \Harnessing the power of wave energy converters," Journal of Ocean Technology, v4, n4, p16-27, 2009.

Beatty, S., Hiles, C., Nicoll, R., Adamson, J., Buckham, B. \Design Synthesis of a Wave Energy Converter," Proceedings of Offshore Mechanics and Arctic Engineering OMAE 2009, 28TH International Conference on Ocean, Oshore and Arctic Engineering, May - June 31 - 5, 2009, Honolulu, Hawaii, USA.

Chernyavsky, B., Wu, T.-C., Oshkai, P., and Djilali, N. "Numerical and experimental investigation of buoyant gas release," International Conference on Hydrogen Safety 2009, Corsica, France, September 16-18, 2009.

Velikorodny, A., G. Duck, P. Oshkai, "Experimental Investigation of Flow over a Backward-facing Step in Proximity to a Flexible Wall," 2009 ASME Pressure Vessels and Piping Division Conference, Prague, Czech Republic, July 26-30, 2009.

Wu, T.C., P. Oshkai and N. Djilali, "Investigation of Under-Expanded Binary Jets using Particle Image Velocimetry," 20th International Symposium on Transport Phenomena (ISTP-20), Victoria, BC, July 7 - 10, 2009.

Velikorodny, A., G. Duck, P. Oshkai, "Experimental Investigation of Flow over a Backward-facing Step in Proximity to a Flexible Wall," 20th International Symposium on Transport Phenomena (ISTP-20), Victoria, BC, July 7 - 10, 2009.

Chernyavsky, B., F. Peneau, N. Djilali and P. Oshkai, "Investigation of the Nozzle Exit Conditions Influence on the Near Field and Transition Regions of Turbulent Buoyant Flows," 20th International Symposium on Transport Phenomena (ISTP-20), Victoria, BC, July 7 - 10, 2009.

Beatty, S., Buckham, B., Wild, P. "Frequency Response Tuning for a 2-Body Heaving Wave Energy Converter," Proceedings of the 2008 International Society for Offshore and Polar Engineering, July 2008, Vancouver, Canada.

Crawford, C., “Parametric Variations of a Coning Rotor Wind Turbine,” 27th ASME Wind Energy Symposium/46th AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada, January 7-10, 2008.

Chernyavsky, B., T.-C. Wu, F. Peneau, P. Oshkai, and N. Djilali “Numerical Investigation of Subsonic Buoyant Round Jets,” 16th Annual Conference of the CFD Society of Canada, Saskatoon, Saskatchewan, Canada, June 9 – 11, 2008.

Velikorodny, A., T. Yan, and P. Oshkai, “Effect Of Junction Geometry On Acoustic Response Of Side Branch Resonators,” 9th International Conference On Flow-Induced Vibrations (FIV 2008), pp. 767-772, Prague, Czech Republic, June 30 - July 3, 2008.

Younis, A., J. Gu, Z. Dong and G. Li, “Trends, Features, and Tests of Common and Recently Introduced Global Optimization Methods,” Proceedings of the AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, September 10-12, 2008, Victoria, Canada.

Zhou, L., A. Younis, Z. Dong, J. Wishart, “Optimization of Control Strategy and Key Components of a Two-mode Hybrid Vehicle,” Proceedings of the AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, September 10-12, 2008, Victoria, Canada.

Paiva, R., Crawford, C. and A. Suleman, “A Modular MDO Tool for Conceptual Aircraft Design”, Proceedings of the AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Victoria, BC, Sept. 10-12, 2008.

Zhou, L, Z. Dong, S. Wang, and Z. Qi, “Design and Analysis of a Hybrid Backup Power System for a High-Rise and High-Speed Elevator,” Proceedings of the 2008 IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, October 12-15, 2008, Beijing, China.

A.K. Rathore, A.K.S. Bhat, S. Nandi and R. Oruganti, “Closed Loop Control Design of Two Inductor Current-Fed Isolated DC-DC Converter for Fuel Cells to Utility Interface Application”, IEEE Industry Applications Society Annual Conference CD, Oct. 2008, Edmonton.

Velikorodny, A., T. Yan, and P. Oshkai, "Effect Of Junction Geometry On Acoustic Response Of Side Branch Resonators," 9th International Conference On Flow-Induced Vibrations (FIV 2008), pp. 767- 772, Prague, June 30 - July 3, 2008.

Gautam and A.K.S. Bhat, “A Two-Stage Soft-Switched Converter for Electrolyser Application,” accepted for presentation at the National Power Systems Conference, IIT, Mumbai, Dec. 16-19, 2008.

Soylu, S., B. Buckham, and R. Podhorodeski, “Development of a Controller for Underwater Vehicle-Manipulator Systems,” Proceeding MTS/IEEE Oceans 2008, 8 pg., 2008.

Nicoll, R., B. Buckham, and F. Driscoll, “Optimization of a Direct Drive Active Heave Compensator,” Proceedings of 18th International Offshore and Polar Engineering Conference, 8 pg, 2008.

Soylu, S., B. Buckham, and R. Podhorodeski, “Exploiting Redundancy in Underwater Vehicle-Manipulator Systems,” Proc. of 18th International Offshore and Polar Engineering Conference, 8 pg, 2008.

Steinke, D., R. Nicoll, and B. Buckham, “Design Through Simulation: Finite Element Capabilities for Ocean Engineering,” Proceedings of the 27th International Conference on Offshore Mechanics and Arctic Engineering, OMAE 2008-57473, 10 pg., 2008.